Semi-flexible solar panel 110Wp 1080x540mm

Our semi-flexible solar panels are ultra-flat and particularly suitable for slightly curved surfaces. They are bendable by 2.5% of the module length.

This frameless model comes with top of the range Sunpower cells with rear contact and laminated fibreglass - this gives stability despite its low weight (3.5 kg). The EFTE surface with micro-lenses makes the cells less susceptible to dirt and reduces reflection.

The particularly low temperature coefficient and the special circuitry for a high open-circuit voltage enable a higher yield even at high temperatures and low irradiation levels.

The panel is equipped with a 7m (2x4mm² ) cable in a waterproof junction box.

The panel is semi-flexible, i.e. a deflection of max 2.5% is allowed. Metaphorically speaking, the panel may form a bridge over its total length of 1080 mm, with a maximum height of 27 mm in the middle.

Technical data at STD (standard test conditions) with 25 °C ambient temperture, 1000 W/m² solar irradiance and an AM factor of 1.5.